How Much Does Restaurant Cleaning Cost?

Most restaurants pay about $100 to $300 per nightly cleaning visit. Monthly, published guides range from roughly $700 to $9,000 or more. Most independent restaurants land between $1,600 and $6,000 a month, depending on size, kitchen scope, and how many nights a week the crew comes in.

That’s a wide range on purpose. Below is what pushes you toward each end, what’s billed separately, and how to tell whether a quote is fair.

The short version

How it’s priced

Typical range

Best for

Per nightly visit

$100 (small café) · 150–250 (mid-size) · $300+ (large full-service)

Recurring nightly service

Per month

700–3,000 (café or fast casual, light schedule) · 2,000–9,000+ (full-service, nightly)

Budgeting

Per crew hour

30–75 routine · 50–150 deep cleaning

One-time or unpredictable jobs

Per cleaner hour

20–40

Checking a crew quote

Kitchen deep clean

300–800 per session

Quarterly or pre-inspection resets

These ranges come from published cleaning-company guides. Treat them as a planning tool, not a quote.

Per square foot: check the unit first

You’ll see $0.12 to $0.40 per square foot quoted all over the web. Most pages never say what the number covers, and that matters a lot.

One published example prices a 10,000-square-foot space at $0.12 per square foot per cleaning visit, which comes to $1,200 per clean, or $3,600 a month at three visits a week. Read the same way, a 3,000-square-foot restaurant would cost $360 to $1,200 per visit. That’s well above the 150–250 most mid-size restaurants pay per visit, so the per-square-foot range clearly isn’t a safe benchmark by itself.

When a bid comes in per square foot, ask one question: per visit, or per month? Then convert it to a per-visit price and compare that.

Why frequency matters more than square footage

A bigger room costs more to clean once. A more frequent schedule costs more every week.

 

One published example shows the effect. A 3,000-square-foot restaurant came out near $2,075 a month on a two-night schedule and about $6,550 a month on seven nights. Same building, same scope, roughly triple the bill.

 

So the better question isn’t whether you can haggle the per-visit rate. It’s whether every zone really needs nightly attention:

 

  • Nightly: restrooms, cook-line floors, prep surfaces, dining-room floors.
  • Usually fine weekly: booth seams, baseboards, door frames, the packing and staging bench.
  • Usually fine monthly or quarterly: light fixtures, window sills, vents, high dusting.

Splitting your scope into tiers like this is often where the real savings are.

Restaurant Cleaning Cost: What Owners Really Pay (2026 Guide)

What actually moves a restaurant cleaning quote

Cooking style

 A fryer-and-charbroiler kitchen produces far more grease than a salad-and-sandwich spot. Degreasing is slow work, and after frequency, it’s the biggest scope multiplier.

Floor type

Quarry tile with deep grout lines takes much longer than sealed concrete or vinyl, and grout restoration is often quoted separately.

Kitchen share of the footprint

Two 3,000-square-foot restaurants price differently if one is 70% dining room and the other is 70% kitchen.

Time of service

 Overnight work usually costs more, but how much more is often overstated. A night-shift pay differential is typically in the range of 5–15% of a worker’s base pay (Paychex), and it isn’t required by federal law. Wages are only part of what a cleaning company bills, so the effect on your price is smaller. One cleaning company’s breakdown put it at about 6–9%, while another guide cites 10–25% above daytime pricing. If a quote adds far more than that, ask for it to be itemized.

Condition of the space

 If nobody has degreased the kitchen in a year, the first visit carries catch-up labor. Many companies charge a first-time reset fee and then drop to a lower maintenance price.

Supplies and equipment

A bid that leaves out chemicals and consumables can look 10–15% cheaper than one that includes them, according to one published guide.

Contract length

Annual terms usually price below month-to-month, in exchange for less flexibility.

Labor costs

 Labor is the biggest part of any cleaning bill. Published pricing guides put it at roughly 55–75% of the billed rate, depending on whether supplies and overhead are counted. The BLS median wage for janitors and cleaners was $17.71 an hour in May 2025, up from $17.27 the year before, and employers pay payroll taxes, workers’ comp and insurance on top of that.

Cost by type of cleaning

Nightly cleaning (100–300 per visit)

Wiping surfaces, sweeping and mopping, restrooms, trash, and degreasing the outside of equipment. A small café sits near $100. A mid-size restaurant runs 150–at $ 250. A large kitchen with a bar and several restrooms starts around $300.

Deep cleaning (300–800 per session)

This covers what nightly service never reaches: grease behind and under equipment, walls, floor drains, and corners. Most kitchens do it quarterly, and high-volume kitchens may need it monthly. Restoring a long-neglected kitchen can cost several thousand dollars.

Floor care

Machine scrubbing, stripping, and waxing is often quoted at roughly 0.20–0.30 per square foot, and again, confirm the unit and what’s included.

Hood and exhaust cleaning (priced separately)

Hood cleaning isn’t part of a janitorial contract. A regular crew handles the outside of the hood, while the exhaust system is a certified specialty service. Published prices run from a few hundred dollars to well over $1,000 per visit, depending on system size, grease load, and roof access.

 

Inspection and cleaning are not the same thing. NFPA 96 sets how often the exhaust system must be inspected for grease buildup:

 

  • Monthly for solid-fuel cooking
  • Quarterly for high-volume operations (24-hour cooking, charbroiling, wok cooking)
  • Semiannually for moderate-volume operations
  • Annually for low-volume or seasonal operations

 

If the inspection finds grease-laden deposits, those parts of the system must be cleaned by a trained, qualified person. In practice, many kitchens schedule cleaning on the same cadence, but the standard ties the cleaning to what the inspection finds. Your local fire authority has the final say, so confirm your interval with your fire marshal. Grease trap pumping is another separate line, handled by a licensed hauler. Budget hood cleaning, grease traps, and deep cleaning as their own items.

Restaurant cleaning cost in California

California restaurants face a few extra cost drivers.

Wages

The statewide minimum wage is $16.90 an hour in 2026, according to the California Department of Industrial Relations. More than 40 cities and counties set higher local minimums. Reports say the statewide rate rises to $17.40 on January 1, 2027, so check the DIR site before you budget for next year.

Fire code

California adopts its own fire code, and Section 606.3.3 and Table 606.3.3.1 set the inspection intervals for commercial kitchen hoods and ducts. Local fire districts summarize them as monthly for solid-fuel cooking and every six months for most other operations, with records kept after each inspection and cleaning. Confirm the exact table with your local fire district.

Regional pricing

Here’s how published California figures compare. These are estimates from cleaning-industry sources, not quotes.

Region

Hourly rate

Typical cost per visit (mid-size kitchen)

Monthly contract

San Francisco Bay Area

45–65/hr

250–400+

1,300–3,500+

Los Angeles

50–75/hr

230–400

1,500–4,500+

San Diego

40–70/hr

220–380

1,600–5,000+

Orange County

40–65/hr

200–350

1,200–3,000

Sacramento / Central Valley

35–55/hr

150–280

900–2,200

Source: Agape Cleaning Services’ California kitchen cleaning guide. The Los Angeles hourly range also appears in Jobber’s commercial cleaning pricing guide.

For a Los Angeles example of the full picture, one LA vendor publishes these 2026 numbers:

Service

LA County price

Nightly cleaning

800–1,500 per month

Deep clean

500–1,500 per visit

Hood cleaning

300–600 per service

Full program (nightly, monthly deep clean, quarterly hood and grease trap)

1,500–3,400 per month per location

That’s a vendor’s own published pricing, so use it as a benchmark rather than a promise.

How to read an hourly quote

Hourly quotes are easy to misread, because one company may price the crew and another may price each cleaner. Say you get two quotes for the same job:

 

  • Quote A: $50 an hour, two cleaners, four hours on site = $200
  • Quote B: $100 an hour, four cleaners, two hours on site = $200

 

Same eight labor hours, same total. Quote B just finishes in half the time. So ask for crew size and estimated hours, multiply them out, and compare totals instead of rates.

As a rough guide from one published breakdown, a nightly visit takes about 1.5–2.5 crew hours for a café, 2.5–4 for fast casual, 4–6 for a full-service restaurant, and 6–9 for a large, high-volume kitchen.

Reverse your quote: a five-minute sanity check

This example uses made-up numbers.

  1. Take the monthly price: $2,400.
  2. Divide by visits per month. Five nights a week is about 21.7 visits, so that’s about $110 per visit.
  3. Divide by an hourly crew rate. At $45 per crew hour, that’s about 2.5 crew hours per visit.
  4. Ask whether 2.5 hours matches your restaurant. A full-service restaurant of 3,000 square feet typically needs 4–6.

If the hours don’t add up, something is missing: a narrower scope, a smaller crew, or work billed as extra.

What’s usually included, and what usually isn’t

Often included: front- and back-of-house surface cleaning, mopping and sweeping, restroom cleaning and restocking, trash removal, degreasing equipment exteriors, and spot cleaning of splash zones.

 

Often extra:

  • The inside of ovens, fryers, and refrigeration units
  • Drain jetting or enzyme treatment
  • High-wall and ceiling degreasing
  • Pest control
  • Hood and duct cleaning
  • Grease trap service
  • Packing and staging areas, if you do a lot of takeout and delivery and nobody wrote them into the scope

 

Hidden costs to ask about

  • Chemicals and consumables, when billed separately
  • Weekend and holiday rates
  • Same-day or emergency call-outs
  • Equipment movement for work behind heavy equipment
  • Floor restoration such as grout recovery or stripping old wax
  • Anything outside the written scope

 

That last item is the one to guard against. When scope isn’t written down, the work gets priced on the spot, usually at a premium. Writing a zone-by-zone scope is cost control, not paperwork.

Is a cheap bid a red flag?

Not always, but it’s always explained by something. Find out which:

  • Reduced frequency. Fine if you chose it, a problem if it’s buried in a schedule table.
  • Narrower scope. Check whether the kitchen or the degreasing quietly dropped out.
  • Consumables excluded. Add 10–15% in your head and compare again.
  • Thin insurance or subcontracted labor. Ask for the certificate of insurance before the number gets you excited.
  • Intro pricing that jumps later. Read the rate-increase clause.

There’s also a floor. Wages, payroll taxes, insurance, and a normal margin set a minimum, and with California’s wage floor, that minimum is higher than in many states. A kitchen quote far below local norms usually means something is being skipped: coverage, overtime pay, or finishing the job.

How to lower the bill without lowering the standar

  • Split your scope into tiers. Nightly, weekly, and monthly, as above.
  • Let staff handle end-of-shift basics. Wipe-downs and sweeping done in-house leave the crew free for degreasing and floors.
  • Stay on schedule. Regular maintenance is almost always cheaper than emergency resets after a failed inspection.
  • Bundle where it makes sense. Fewer vendors usually means easier scheduling, though hood cleaning will stay with a certified specialist.
  • Ask about annual terms. Just keep an exit clause.

How to get a quote that’s actually accurate

Phone quotes based on square footage alone miss layout, equipment density, floor type and when the crew can get in. A walkthrough fixes that. Ask every provider the same six things:

  1. What exactly is included, and what isn’t?
  2. How many people, for how many hours?
  3. Are supplies and equipment in the price?
  4. What do overnight, weekend, and holiday visits cost?
  5. How are add-ons and one-off jobs priced?
  6. What are the cancellation and rate-increase terms?

An itemized proposal protects both sides and makes three quotes easy to compare.

Want a number built around your kitchen instead of a national average?

Contact Agape Cleaning Services for a quote. Tell us your size, your hours, and how often you need service, and we’ll help you scope it. You can also see how we handle commercial kitchen cleaning and deep cleaning.

FAQ

How much does restaurant cleaning cost per month?

Published guides range from about $700 for a small café on a light schedule to $9,000 or more for a full-service restaurant cleaned nightly. Most independent restaurants pay 1,600–6,000.

You’ll see 0.12–0.40 per square foot quoted, but many sources don’t say whether that’s per visit or per month. Always confirm the unit, then convert it to a per-visit price before comparing bids.

Usually 300–800 per session. In Los Angeles, one vendor publishes 500–1,500 per visit. Long-neglected kitchens can cost several thousand dollars.

Usually not. Exhaust system cleaning is a certified specialty service, often priced separately from a few hundred dollars to over $1,000 per visit.

 NFPA 96 sets how often it must be inspected: monthly for solid fuel, quarterly for high-volume cooking, semiannually for moderate-volume, and annually for low-volume. It must be cleaned when an inspection finds grease deposits. Your local fire authority sets the final requirement.